All Categories
all-categories
All fluid contact components are injection molded or fabricated of homogeneous polypropylene (PP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF) - corrosion resistant thermoplastics that are chemically inert to the fluids they are specified to handle. The heavy-duty stainless steel shaft is completely isolated from the fluid by a thick-sectioned thermoplastic sleeve, eliminating metal contact with the pumped fluid.
Unlike metals (including stainless steel, Hastelloy® and other high alloys) that have annual corrosion rates, Vanton thermoplastics do not, allowing all liquids to be handled free of contamination, while maintaining the integrity of ultrapure liquids.
SUMP-GARD® vertical pumps are ideal for handling a broad range of corrosive, hazardous, toxic and otherwise aggressive fluids used throughout the processing and manufacturing industries, in utilities, and industrial and municipal water/wastewater treatment facilities - virtually any acidic, caustic, hazardous or unknown mixtures of waste/effluent or combination of fluids across the entire pH spectrum collected in tanks and sump pits.
Every Vanton pump is fully tested to verify performance with all data permanently recorded. /Asset/sump-gard.png
Unlike metals (including stainless steel, Hastelloy® and other alloys) that have annual rates of corrosion, Vanton thermoplastics are inert, allowing ultrapure liquids to be transferred free of contamination.
To fit virtually any new or existing application, CHEM-GARD® pumps are offered in numerous configurations including: ANSI, DIN, self-priming, close-coupled, mag-drive, combination close-coupled/mag-drive, sealless, and motor designs with integral pump shafts.
It means that a Vanton pump can meet and exceed your performance requirements, while conforming to your new or existing dimensional specifications.
The wet end is comprised of solid, thick-sectioned, stand-alone components (unlike plastic linings), that are easily replaced, maximizing uptime while minimizing cost.
The unique combination of advantages makes CHEM-GARD® pumps ideal for the transfer of process fluids, treatment chemicals, plant effluents and industrial or municipal water and waste streams. For transfer of slurries, stringy materials, and liquids containing solids to 2 in. (51 mm) in diameter, CG, CGA and CGC models of CHEM-GARD® pumps are available with Vortex pump heads.
Every Vanton pump is fully tested to verify performance with all data permanently recorded. /Asset/ChemGard_lg.png
SUMP-GARD® Vertical Centrifugal Pumps
SUMP-GARD® vertical centrifugal pumps are available in lengths from 12 in. to 20 ft (0.3 m to 6.1 m), and handle flows to 900 gpm (204 m³/h), heads to 180 ft. (55 m) and temperatures to 275ºF (135ºC).All fluid contact components are injection molded or fabricated of homogeneous polypropylene (PP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF) - corrosion resistant thermoplastics that are chemically inert to the fluids they are specified to handle. The heavy-duty stainless steel shaft is completely isolated from the fluid by a thick-sectioned thermoplastic sleeve, eliminating metal contact with the pumped fluid.
Unlike metals (including stainless steel, Hastelloy® and other high alloys) that have annual corrosion rates, Vanton thermoplastics do not, allowing all liquids to be handled free of contamination, while maintaining the integrity of ultrapure liquids.
SUMP-GARD® vertical pumps are ideal for handling a broad range of corrosive, hazardous, toxic and otherwise aggressive fluids used throughout the processing and manufacturing industries, in utilities, and industrial and municipal water/wastewater treatment facilities - virtually any acidic, caustic, hazardous or unknown mixtures of waste/effluent or combination of fluids across the entire pH spectrum collected in tanks and sump pits.
Every Vanton pump is fully tested to verify performance with all data permanently recorded. /Asset/sump-gard.png
CHEM-GARD® Horizontal Centrifugal Pumps
Wet end components of Vanton CHEM-GARD® centrifugal pumps are injection molded of corrosion resistant polypropylene (PP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinylidene fluoride (PVDF), ethylene chlorotrifluoroethylene (ECTFE) or other non-metallic materials that are 100% inert to the fluids being handled across the entire pH range. This eliminates the corrosion and failure associated with pumps constructed of stainless steel and other alloys, the wicking associated with fiberglass pump components and the delaminating inherent with plastic-lined metal pumps.Unlike metals (including stainless steel, Hastelloy® and other alloys) that have annual rates of corrosion, Vanton thermoplastics are inert, allowing ultrapure liquids to be transferred free of contamination.
To fit virtually any new or existing application, CHEM-GARD® pumps are offered in numerous configurations including: ANSI, DIN, self-priming, close-coupled, mag-drive, combination close-coupled/mag-drive, sealless, and motor designs with integral pump shafts.
It means that a Vanton pump can meet and exceed your performance requirements, while conforming to your new or existing dimensional specifications.
The wet end is comprised of solid, thick-sectioned, stand-alone components (unlike plastic linings), that are easily replaced, maximizing uptime while minimizing cost.
The unique combination of advantages makes CHEM-GARD® pumps ideal for the transfer of process fluids, treatment chemicals, plant effluents and industrial or municipal water and waste streams. For transfer of slurries, stringy materials, and liquids containing solids to 2 in. (51 mm) in diameter, CG, CGA and CGC models of CHEM-GARD® pumps are available with Vortex pump heads.
Every Vanton pump is fully tested to verify performance with all data permanently recorded. /Asset/ChemGard_lg.png
